Follow Us On:
100/1000Base-FX SGMII SFP transceiver module

100/1000Base-FX 1310nm SGMII SFP transceiver module 550m/2km/10km reach

SGMII SFP is used to connect Gigabit Ethernet to Fast Ethernet, such as between switch and switch interface, switched backplane applications and router/service interface.

Telesail's SGMII SFP transceiver is high performance, cost effective modules. It is designed for 100BASE-LX applications of 10km with SMF. The transceiver consists of two sections: The standard SFP part and the PHY part built with SGMII interface. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or link)/Disable/Fault information via I2C register access. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol.

  • Quick Specs
  • Further Information
  • Related Products
  • Featured Application

 

  •     Hot-pluggable and duplex LC connector
  •     Built-in PHY with Cisco Serial-GMII Specification
  •     Built-in MCU to support easier PHY register configuration
  •     Support CRC error counter,package counter and Far End Fault Indication
  •     Optical interface operating at 100BASE-FX or 100BASE-LX or 1000BASE-LX
  •     Transmission distance:0.5Km/2Km/10Km on SMF/MMF
  •     Optional support Digital Diagnostic function:SFF-8472 Rev 9.5
  •     Hot-pluggable and duplex LC connector
  •     Built-in PHY with Cisco Serial-GMII Specification
  •     Built-in MCU to support easier PHY register configuration
  •     Support CRC error counter,package counter and Far End Fault Indication
  •     Optical interface operating at 100BASE-FX or 100BASE-LX or 1000BASE-LX
  •     Transmission distance:0.5Km/2Km/10Km on SMF/MMF
  •     Optional support Digital Diagnostic function:SFF-8472 Rev 9.5
  •     Tx/Rx center wavelength 1310nm FP
  •     Metal enclosure. The lower EMI and excellent ESD Protection
  •     Single +3.3V power supply and Low power dissipation
  •     Wide operation temperature range,
  •     Compatiable with IEEE802.3-2005
  •     Compliant with FCC 47 CFR Part 15,Class B
  •     Compliant with Telcordia(Bellcore)GR-468-CORE  
  •     Compliant with  FDA 21 CFR 1040.10 and 1040.11,Class 1


Product

P/N

 Data  Rate
(Mb/s)

Tx 

 Tx 
Wavelength
(nm)

 Tx  
Power
(dBm)

 RX

 Sensitivity
(dBm)

 Distance
(Km)

Temperature (℃) 

DDMI

(Y/N) 

TGM-FE02-310C

 125

 FP

 1310

 -20~-14

 PIN

 -25

 2

 -5~+70

 N

 TGM-FE02-310C

 125

 FP

 1310

 -20~-14

 PIN

 -25

 2

 -40~+85

 N

 OGM-FE10-310C

 125

 FP

 1310

 -15~-8

 PIN

-29

 10

 -5~+70

 N

 TGM-FE10-310I

 125

 FP

 1310

 -15~-8

 PIN

-29

 10

 -40~+85

 N

 TGM-FE02-311C

 125

 FP

 1310

 -20~-14

 PIN

 -25

 2

 -5~+70

 Y

 TGM-FE02-311C

 125

 FP

 1310

 -20~-14

 PIN

 -25

 2

 -40~+85

 Y

 TGM-FE10-311C

 125

 FP

 1310

 -15~-8

 PIN

-29

 10

 -5~+70

 Y

 TGM-FE10-311I

 125

 FP

 1310

 -15~-8

 PIN

-29

 10

 -40~+85

 Y

 TGM-1102-311C

 125/1250

 FP

 1310

 -20~-14/-11~-3

 PIN

 -29/-23

 2/0.55

 -5~+70

 Y

 TGM-1102-311I

 125/1250

 FP

 1310

 -20~-14/-11~-3

 PIN

 -29/-23

 2/0.55

 -40~+85

 Y

 TGM-1110-311C

 125/1250

 FP

 1310

 -15~-8/-11~-3

 PIN

 -29/-23

 10

 -5~+70

 Y

 TGM-1110-311I

 125/1250

 FP

 1310

 -15~-8/-11~-3

 PIN

 -29/-23

 10

 -40~+85

 Y




  •   Switch to Switch Interface
  •   Switched backplane
  •   Router/Server Interface
  •   Other optical transmission systems




 

Need more information?
Contact us at  [email protected] 
 
 

Feedback

Use this form to communicate with Telesail.

Frist Name: 

Last Name: 

Tel: 

Email: 

Company: