2Km,100GE QSFP28 CWDM4 SMF Optical Transceiver Module,Duplex LC
The 100G QSFP28 CWDM4 optical transceiver (TQS-CG02-31DCR) is designed for use in 100 Gigabit Ethernet links on up to 2 km over single mode fiber (SMF). They are compliant with the QSFP28 MSA, CWDM4 MSA, and relevant portions of IEEE P802.3bm standard.
The QSFP28 CWDM4 module uses Mux/Demux technologies, which converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data.
It is centered around the 1310nm band with 20nm channel spacing as defined by the ITU standard. With a reach of 2km, QSFP28 CWDM4 transmits 100G optical signals via a duplex LC interface.
Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
The QSFP28 CWDM4 module uses Mux/Demux technologies, which converts 4 input channels of 25Gb/s electrical data to 4 channels of CWDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of CWDM optical signals and then converts them to 4 output channels of electrical data.
It is centered around the 1310nm band with 20nm channel spacing as defined by the ITU standard. With a reach of 2km, QSFP28 CWDM4 transmits 100G optical signals via a duplex LC interface.
Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
- Quick Specs
- Further Information
- Related Products
- Featured Application
- • Hot-pluggable QSFP28 form factor
- • Integrated CWDM TOSA/ROSA
- • 4 independent CWDM lanes MUX/DEMUX design
- • Supports 103.1Gb/s aggregate bit rate (4 x 25.78125 Gbps)
- • 100G CWDM4 MSA Technical Spec Rev1.1
- • Up to 2km transmission on single mode fiber (SMF) with FEC
- • Supports digital diagnostic monitoring
- • Single +3.3V power supply
- • Operating case temperature range of 0 to 70oC
- • Low power consumption < 3.5W
- • LC duplex receptacles
- • RoHS compliant
|
Product |
Package |
Fiber |
Data Rate |
Wavelength |
Distance |
Connector |
Temperature |
DDMI |
|
TQS-CG02-31DCR |
QSFP28 |
SMF |
103.125G |
CWDM |
2km |
LC |
-5~70℃ |
Y |